简体版 繁體版
Login Sign Up

retaining bolt in Chinese

Pronunciation:
How to pronounce "retaining bolt""retaining bolt" in a sentence
TranslationMobile
  • 留挂螺栓
Examples
  • Reinstall handwheel and secure with retaining bolt
    重新安装手轮,用固定螺栓加固。
  • Secure with the retaining bolt
    用固定螺栓进行加固。
  • Reinstall the handwheel in the correct orientation so that the original setting is indicated and secure with the retaining bolt
    按照正确的方向重新安装手轮,使得原先的设置能够显示,并用固定螺栓加固。
  • Unscrew the retaining bolt ( see figure 7 , # 1 ) . hold the element with pliers and remove it using a semicircular motion
    旋下固定螺栓(参阅图7 , # 1 ) 。用钳子握住加热元件(加热棒)旋转半圈拆卸下加热棒。
  • Install the new element and gasket , checking for correct positioning . reconnect the electrical terminals and tighten the retaining bolt
    安装新的加热棒和垫圈,确认是否位置是否正确。重新连接电气端子,旋紧固定螺栓。
  • After the valve has been set to the correct balance point , record the setting . without turning the handwheel , remove the retaining bolt from the end of the handwheel
    在正确设置阀门的平衡点后,记录下设置值。不需要旋转手轮,直接从手轮末端拆卸固定螺栓。
  • After the valve has been adjusted to its balance set point and without moving the handwheel , remove the retaining bolt from the end of the handwheel using a 1 / 4 " allen wrench
    在阀门调整到平衡点,并且没有旋转手轮后,采用一把1 / 4 "通用扳手从手轮末端拆卸固定螺栓。
  • With the handwheel / turn indicator sleeve assembly still at its balance set point indication , reinstall them on the valve stem and hold in place with the 1 / 4 " retaining bolt
    这时手轮/旋转指示器套筒总成仍然位于平衡设置指示点上,将它们重新安装到阀杆上,并用1 / 4英寸固定螺栓固定在其位置上。
What is the meaning of retaining bolt in Chinese and how to say retaining bolt in Chinese? retaining bolt Chinese meaning, retaining bolt的中文retaining bolt的中文retaining bolt的中文,translation, pronunciation, synonyms and example sentences are provided by ichacha.net.