# lean angle in a sentence

- The italic fonts have 11 degree
*lean angle*. - Otherwise, customization can increase the bike's
*lean angle*to enable cornering at higher speeds. - The later K1200 engine is a 1, 157 cc center of mass without reducing maximum
*lean angles*. - This lean of the bike decreases the actual radius of the turn proportionally to the cosine of the
*lean angle*. - The finite width of the tires alters the actual
*lean angle*of the rear frame from the ideal lean angle described above. - It's difficult to find
*lean angle*in a sentence. - The finite width of the tires alters the actual lean angle of the rear frame from the ideal
*lean angle*described above. - The actual
*lean angle*between the frame and the vertical must increase with tire width and decrease with center of mass height. - The article gives the relationship between the
*lean angle*and the other parameters as tan? = m 2 / ( gr ). - If the tires are only 6 inches wide, then the
*lean angle*increase is only 3.16? just under half. - A slight increase in the
*lean angle*may be required on motorcycles to compensate for the width of modern tires at the same forward speed and turn radius. - If the bike is displaced slightly downwards from its equilibrium
*lean angle*, the torque of gravity increases, that of centrifugal force decreases and the displacement gets amplified. - This made the bike heavier and reduced the available
*lean angle*, while it reduced the amount of vibration transmitted to the frame and the rider, providing a smoother ride for rider and passenger. - If, having reached a given
*lean angle*, the centripetal forces are reduced then the motorcycle increases its angle of lean until it touches the road surface, usually unseating the rider in the process. - In addition to these technical changes, the 2017 R1200RT is now available with optional ABS Pro, which senses
*lean angle*and adjusts intervention accordingly " ( as part of the Ride Modes Pro option package ) ". - In this idealized and linearized model, there are many geometric parameters ( wheelbase, head angle, mass of each body, wheel radius, etc . ), but only four significant variables :
*lean angle*, lean rate, steer angle, and steer rate.

More: 1 2