fiber amplifier in a sentence

1. Examples of such sources include superluminescent diodes and doped fiber amplifiers.
2. This is important for fiber amplifiers when utilized for the amplification of short pulses.
3. It has four fiber strands, using Erbium-doped fiber amplifier repeaters and wavelength division multiplexing.
4. Modern optical fiber repeaters use a solid-state optical amplifier, usually an Erbium-doped fiber amplifier.
5. The main grid is placed inside the optical fiber amplifier bandwidth, but can be extended to wider bandwidths.
6. It's difficult to find fiber amplifier in a sentence.
7. The cables are fed 1.1 ampere at 2, 500 volt, fed from two redundant erbium doped fiber amplifier pairs.
8. Other developments followed : the laser diode in the 1970s, optical fibers for transmitting information, and the erbium-doped fiber amplifier.
9. Doping is also possible with laser-active ions ( for example, rare earth-doped fibers ) in order to obtain active fibers to be used, for example, in fiber amplifiers or laser applications.
10. Because of these properties silica fibers are the material of choice in many optical applications, such as communications ( except for very short distances with plastic optical fiber ), fiber lasers, fiber amplifiers, and fiber-optic sensors.
11. One key enhancement enabling penetration into the scientific market has been the improvements in high finesse fiber amplifiers, which are now capable of delivering single frequency linewidths ( < 5 kHz ) together with excellent beam quality and stable linearly polarized output.
12. The broad variety of passive optical components applications include multichannel transmission, distribution, optical taps for monitoring, pump combiners for fiber amplifiers, bit-rate limiters, optical connects, route diversity, polarization diversity, interferometers, and conherent communication.
13. The latest generation of high finesse, high power fiber amplifiers now deliver power levels exceeding what is available from commercial solid-state single frequency sources and are opening up new scientific applications as a result of the higher power levels and stable optimized performance.
14. The erbium-doped fiber amplifier, which reduced the cost of long-distance fiber systems by reducing or eliminating optical-electrical-optical repeaters, was co-developed by teams led by David N . Payne of the University of Southampton and Emmanuel Desurvire at Bell Labs in 1986.
15. In addition to optical fiber amplifier-lasers, a large variety of medical applications ( i . e . dermatology, dentistry ) rely on the erbium ion's emission ( see Er : YAG laser ), which is highly absorbed in water in tissues, making its effect very superficial.