简体版 繁體版 Hindi
Login Sign Up

delivery tube in Chinese

Pronunciation:
How to pronounce "delivery tube""delivery tube" in a sentence
TranslationMobile
  • 导出管
  • 灌注管
  • 压送管路
Examples
  • Fabric and the water at the end of the delivery tube
    "的特殊设计,在导布管尾端将布
  • Enable the smooth delivery of fabric and no congestion inside the delivery tube
    滑传送,不会堵塞在布管内。
  • Users should have regular visual check on the condition of the regulator and delivery tubing to ensure no leakage or damage and free from dust or other contaminants
    使用者应定期检视调节器及输送喉的操作情况,确保没有泄漏气体,亦没有尘埃或其他物体污染。
  • Then the paper also study the atomizer structure ( the protrusion of the delivery tube value h ) , atomizing gas pressure p , over - heat temperature of alloy a t , the component of solder alloy and atomizing medium and so on
    进一步对雾化器结构(导液管突出高度h ) 、雾化气体压力p 、合金过热度t 、焊锡合金成份和雾化介质进行了研究。
  • The conclusions are drawn as following : 1 . regularity of fabrication in aluminum matrix composite ring - shaped performs with large dimensions and effects of parameters were investigated , based on the novel crucible movable spray deposition technology and equipment . the optimal parameters are that the diameter of the delivery tube is 3 . 8mm , spray gas pressure is 0 . 8mpa , spray height is 200mm , and transferring pressure of sic is 0 . 5mpa
    通过系统的实验研究得到如下结论: 1 .基于新型的移动坩埚自动化控制喷射沉积环坯制备技术及装置,研究了大尺寸铝基复合材料环坯的制备规律,讨论了喷射沉积工艺参数对沉积坯形成过程的影响,得到了最佳工艺参数:导流管直径d = 3 . 8mm ,雾化气体压力p = 0 . 8mpa ,喷射高度h = 200mm , sic颗粒输送压力p送= 0 . 5mpa 。
  • The optimal parameters of making high silicon content aluminum alloys is : spray height is 220 - 230mm , spray angle is 30 ? the scanning velocity of atomizer is 30mm / s , the original offset of the substrate is 30mm , rotation velocity of the substrate is 120rpm , spray gas pressure is l . ompa , the diameter of the delivery tube is 3 . 6mm , the drawing velocity of the substrate will be adjusted on - line with a plc on the basis of the spray
    通过对多层喷射沉积原理及工艺参数的研究,得出制备al - 22si - 3cu - 1mg合金的最佳工艺参数为:喷射高度为220mm - 230mm ,基底转速为120rpm ,雾化器扫描速度为30mm / s ,基底下降转速依据喷射情况由智能控制器进行实时调整,喷射角度为30 ,初始偏心距为30mm ,导流管直径为3 . 6mm ,雾化气压为1 . 0mpa 。
What is the meaning of delivery tube in Chinese and how to say delivery tube in Chinese? delivery tube Chinese meaning, delivery tube的中文delivery tube的中文delivery tube的中文,translation, pronunciation, synonyms and example sentences are provided by ichacha.net.